non-combustibility and fire-resistance
Call: +420 381 549 215
Water soluble, soiled tools can be washed with water.
With Klebepaste inorganic glue, you can stick Grena vermiculite boards not only together, but also on steel, concrete, masonry, stone, ceramics, wood, etc.
It can also be used for direct contact with fire.
Its practical packaging allows easy application.
Mix the glue well before processing. Cartridge must be well "rotten". We recommend processing the glue at temperatures above + 10 ° C. The surfaces must be clean, dry, free of dust and grease before application.
After applying the glue with a notched trowel or "caterpillar", lightly press the dry counterpart onto one surface and gently press the two surfaces together in a circular motion to fill all joints.
The glued materials must be pressed together within approx. 3 minutes. Make sure that the glue does not close its surface and create undesirable skin. The amount of Klebepaste depends on the glued materials. Usually the amount is in the range of 1 - 1.8 kg / m2. When applying a large amount of adhesive, remove the excess with a notched trowel.
The setting depends on the surfaces, the type of material and the amount of glue applied. At 20 ° C the glue will be set in12 hours.
+420 381 549 111
Grena a.s., Třída Čs. armády 541, 391 81 Veselí nad Lužnicí II. All rights reserved